Ambiti di Applicazione
HARDENER H 92
Epoxy resin hardener, for coating iron or damp concrete. Use with RI 301 in proportion:100 + 30. Pot-life at +20°C = 5’ (tested on 150 g).
Fast hardening agent for epoxy resins.
Minimum hardening temperature = + 10 °C.
Pot-life at +20°C = 5 min (test on 150 g).
Viscosity at 25 °C | 10 - 20 cP | |||||||||||||
Density at 25 °C | 0,93 g/cm3 | |||||||||||||
H+ | 55 g/eq | |||||||||||||
Amino no. | 575 - 605 mgKH/g | |||||||||||||
Gardner | ≤ 2 | |||||||||||||
Use ratio | 100 + 30 |
Pour the hardening agent in the resin and blend at slow speed for 3’ – 5’ using drill with helix/spiral to reduce air inlet as much as possible; during this operation, scrape also the bottom and the sides of the bucket.
Three essential rules are valid for all bi-component systems: weigh well, carefully mix bottom and walls,
observe times of use.
Available in cans as per amount shown in the table below: 10.00 kg – 25.00 kg
Hardening agents remain unaltered for at least 18 months if stored in a dry and sheltered place at a
temperature between +10°C and +30°C in their origin al sealed containers.