Our materials are designed for strength, durability, and a unique design touch, adapting perfectly to the needs of project implementers.
Resicol 122 is a semi-fluid product based on liquid epoxy resins, cross-linked using a polyamide hardener.
The mixture of the two components produces a highly adhesive system on both dry and damp surfaces.
Resicol 122 is a semi-fluid product based on liquid epoxy resins, cross-linked using a polyamide hardener.
The mixture of the two components produces a highly adhesive system on both dry and damp surfaces.
| Property | Value |
|---|---|
| Adhesion to dry concrete | > 8 N/mm² |
| Adhesion to damp concrete | > 2 N/mm² |
| Viscosity at 23°C | 980 cP |
| Density | 1.06 kg/dm³ |
| Mix ratio A + B | 100 + 60 |
Preparation of the support
The surface to be treated must be clean, solid and compact, it must not have puddles or superficial films of liquids, it must be free from crumbly parts and cement grout, oils, release agents and loose materials.
Product preparation
Pour component B into component A and mix for at least 3 minutes by hand or with a low speed drill mixer (electric drill) until a homogeneous fluid is obtained.
Application
The application of RESICOL 122 must take place immediately after mixing; it can be applied by roller and brush on both horizontal and vertical surfaces.
Do not apply at temperatures below +8 / +10°C.
If used as a adhesion prometer for new castings of concrete, the concrete must be cast within 2-3 hours of applying the product itself.
As a base coat or primer, it is applied homogeneously by roller and brush, on suitably prepared substrates, to ensure perfect adhesion of subsequent synthetic coatings, especially in the presence of humidity.
| Temperature | Pot-life (150 g) | Hardening (300 μm film) | Full hardening |
|---|---|---|---|
| 20°C | 65 min | 3–4 h | 7 days |
| 30°C | 34 min | 3–4 h | 7 days |
Consumption
If used as adhesion promoter for new castings: from 0,7 to 1 kg/m²;
if used as basecoat: from 0,2 to 0,3 kg/m2.
Packaging and storage
Available in packages (A + B) of 8 kg, 16 kg and 40 kg.
In original and closed packaging, the product remains unchanged for at least one year if it is kept in
an environment with a temperature between 10 and 30 °C.
• Adhesion promoter for new castings on old concrete;
• Basecoat or primer for other epoxy systems;
• Bonding of building materials in general.