In this article we want to tell you about resin floors for chemical industries, but also about floors for the pharmaceutical industry and for any craft laboratory.
Below we also give you our solutions with their respective advantages and our advice on which environments different resin floors are best suited for.
Multimix, flooring for chemical industries and beyond.
When laid, it appears as a continuous, monolithic wall covering with many facets thanks to the different finishes we can achieve.
Multimix ranges in thickness from 2 to 5 millimeters and has no solvents.
We at Resimix recommend it for the chemical, mechanical, metallurgical and shipbuilding industries, but not only that: this floor covering is also suitable in the sanitary and food industries. In fact, the sectors in which Multimix can be used are many, and this is due to its characteristics: it is a coating that has
- High wear and impact resistance,
- remarkable chemical resistance,
- Is waterproof and non-slip,
- Is easy to clean and decontaminate,
- it is easy to restore the wear layer or change the color.
Want to learn about other Resimix resin floors, too? Browse through the catalog here!
Automix, ideal for floors in the pharmaceutical industry.
Among our most in-demand self-levelling floors, Automix is between 2 and 3 millimeters thick and is obtained by pouring fluid solvent-free epoxy formulations.
Easy to clean and decontaminate, its main characteristic is hygiene and is therefore ideal in environments where hygiene standards and requirements must be met such as
- hospital rooms and wards,
- the pharmaceutical and health care industry
- And clean rooms (clean rooms).
But Automix is also suitable in the electronics, precision engineering and goldsmith industries.
Rinfomix, the right floor for your craft workshop.
It is a multilayer flooring with a thickness between 3 and 5 millimeters, made with layers of solvent-free epoxy self-levelling agents saturated with German spheroidal quartz. In the first resin layer we add a fiberglass mesh.
Its properties make it a resin floor suitable in a variety of industries, from mechanical to sanitary and food, but it is also a coating of choice for craft workshops and precision industries.
Do you want to know its characteristics? Here they are: Rinfomix is
- resistant to wear, impact, acidic and basic chemicals, industrial detergents and pressurized water jets (due to high thickness),
- anti-skid,
- Easy to clean and decontaminate,
- is finished with varying degrees of antiskid, so as to comply with safety regulations for the prevention of occupational accidents,
- Simple to customize with lettering, signs and colors.
Chemical resistance is imparted by the finishing layer of RESICOLOR 421, 421/2 and 411.
Our experts are available for advice and assistance, so if you want to learn more, contact us!
Resin flooring for chemical industries – Resimix Ltd.
Do you know why you should choose our resin floors for chemical industries, the pharmaceutical industry or for your craft workshop? Read more here!